Thanks much love these entries you all send out. Is that a Janome America model? I know they are always working on new products for us in terms of machine models and feet & accessories. I have an Elna 680 and need a ruler foot for it. Most quilt stores carry one or another of these brands of rulers OR can certainly order for you if you ask. Sorry. http://janome.co.uk/contact-us/. If you have a HIGH shank JANOME machine that has a 7mm opening in the needle plate, then you need: Convertible Free Motion foot for High shank 7mm Part # 202001003 PLUS the frame set above for the “ruler” foot. As with all the new feet, it landed on my desk, I looked at it and saw the information on the box indicated it was for use with the JANOME 1600P. What is the ruler foot part # for my machine. CURVED CROSS HATCHING QUILTED ONTO MY WALL HANGING. Kit includes the following: Hearts of Plenty - 5" x 6" There are 2 pieces in this blister pack: one may be discarded as it was designed for a different machine (the open toe foot). HI, I have a Janome MC 8900 QCP special edition. I don’t have a date for when this will be available but keep watching this blog and we will announce when it is ready to download an update for your machine. I have the Janome MemoryCraft 10001 machine. I was told it was a JANOME FOOT???? Thank you. Janome Canada does not sell these rulers. Prime members enjoy FREE Delivery and exclusive access to music, movies, TV shows, original audio series, and Kindle books. Do also check out Amy’s blog as she has advice & video’s there too. JANOME FOOT CAT C Top loading machines (7mm width - high shank) CLICK HERE FOR THE CORRECT FEET CAT C. MC11000SE, MC11000, MC10001, MC10000, MC9700, MC9500, MC9000, MC8000, MC7700QCP HORIZON, MC6600P, MC5700, MC5000, XC500 Atelier 3. Then the machine beeped at me and signaled that I need to put the feed dogs up. 4.1 out of 5 stars 22. Smart H Adjustable Guide Sewing Machine Presser Foot. We are not familiar with that model here in Canada. I am a brand new, first time janome owner, I bought the 6700P, is there a ruler foot I can use? $43.85 $ 43. Is it possible to buy the quarter inch closed ruler foot separately, as I do not want or need the open-toe that comes as part of the set (#767434005). If you have a HIGH shank JANOME machine that has a 9mm opening in the needleplate, then you need: Convertible Free Motion Foot set for 9mm Part # 202146001 PLUS the frame set for the “ruler” foot You may already have the Convertible Free Motion foot set as this does come as a standard accessory with some of our JANOME machine models. NO, Kathy, you have been misinformed. It is compatible with this Convertible set. Warranty will not cover damage caused by using these feet on models with Auto presser foot lift: Janome Mc12000, Mc15000 and Skyline S7. Now I must tell you a little bit of a story about this foot: We have had it for a long time….I’m thinking several years. If you have a LOW shank JANOME machine (ask your local JANOME DEALER if you are unsure) then you would need the following Janome parts:  Convertible Free Motion foot set for low shank models Part # 202002004 PLUS the part # listed above which contains the 2 extra parts – one of which is the “ruler” foot. Yes, the Janome TS100Q is a low shank machine and these items will work on your machine. Remember to allow 1/4 inch between the desired placing of the stitching & ruler edge as the distance between the edge of the foot which will ride along the ruler edge and the needle is 1/4 inch. £9.99 £ 9. This can also work on any high shank model without auto-presser foot height adjustment when used with the Ruler Work Foot from the Frame Quilting Set (767434005). You would need to establish if it is a high or low shank (probably the latter) and then buy the Convertible free motion foot set + ruler foot attachment accordingly. We do not have one yet. Thank u for your help. Top subscription boxes – right to your door, © 1996-2020, Amazon.com, Inc. or its affiliates. I have a Janome Memory Craft 6500 and I want the “ruler Foot” to do ruler work, I am suppose to buy #202002004 Convertible Free Motion Foot Set (Low Shank), but the 1/2 inches high ruler foot attachement doesn’t seem to be in the package. So I set the Mode to 1:1s to keep the needle in the middle. All you need is the “ruler foot” : JANOME FREE MOTION FRAME QUILTING FOOT SET PART #767434005. From beginner to artisan; sharing what we love about Janome sewing machines for sewing, creating and quilting. FREE MOTION FRAME QUILTING FEET SET – I am talking about the foot on the LEFT. It may beep at you at first but did you try to sew anyway with the feed dogs down? 2 Pieces Stainless Steel Free Motion Ruler Quilting Presser Foot for Brother Janome Sewing Machines. Thank you again! Please ask your local Janome dealer to order this part # for you. I have a janome 12000. HONEYSEW Free Motion Frame Quilting Feet Set for Janome 1600P Ruler Foot Convertible 767434005. If it is listed and you don’t have it….well then my advice would be to start tidying up your sewing room and searching in all those drawers & boxes as you may have mislaid a very useful set of feet for your machine!! The link above has a video and other information relevant to the functioning of these CONVERTIBLE FREE MOTION FEET SETS. Snapping On Brother, Babylock, Singer, Janome , Juki, New Home. Please note that the Janome 1600P has a different configuration and side loading which our other machines do not have. 85. It is not recommended. Please note that the ruler foot which is available for the MC 15000 will not work on the MC 9400 until the machine is updated. The 1/4” cup height moves smoothly alongside the quilting ruler without allowing the ruler to slide over or under. giuliana. These feet do need to be attached to a CONVERTIBLE free motion foot for the Janome 1600P which is a separate part # 767433004. ……..Needless to say, I was coming up blank as I had not heard anything about a RULER foot. I tried sewing despite the beeping and the icon showing a feed dog issue, and it works beautifully. Liz The brand name on mine is The Gadget Girls & has scallops on one side & a double curve on the other. I have a Janome MC 5900 will a ruler for work on this machine (low shank I think)? I cannot speak for other countries who may have these rulers available for their Janome dealers to sell. Do your research on which brands and styles might be useful for your purposes and then ask your dealer to order this for you. You need to choose the Mode 1 #1 stitc – straight stitch in centre needle position. I have a Janome TS100Q. It will more than likely be available as a separate item later but I do not have an ETA on this for Canada and certainly cannot speak for Janome UK. Hi Liz, Hi Dotti, Which one do I need to purchase please? You only now need part # 767434005. We notify our Dealers and we do posts on janomelife whenever one of these new products becomes available in Canada so do keep watching. FREE Shipping. Trying to free motion quilt with the feed dogs up doesn’t seem to make my machine happy or result in good stitch quality. So, what will you be free motioning today???? The ¼” Ruler Foot was specifically designed to use for ruler work using Janome quilting rulers. Here is where the RULERS come in. There needs to be an update to the firmware of the MC 9400 to allow use of the new Ruler foot on this machine. Do I just buy the ‘foot’ part that would fit on the free motion/darning foot? Thank you- Guylaine. It is a special straight or curved ruler which is a bit thicker than a regular rotary cutting ruler.